Ghost 2 Immobiliser Installation
The ghost 2 immobiliser installation is a quick and efficient method to safeguard your vehicle from theft. It connects directly to your vehicle's CAN data network, and is virtually undetectable.
First, identify the source of power that is constant and an earthing point. It is essential to have these wires correctly insulated to prevent electrical shorts.
Protects against theft
The Ghost 2 Immobiliser uses an exclusive PIN code sequence that is created by using the existing electronic buttons on your steering wheel or center console to ensure that only you are able to start your vehicle. Even if thieves were able to copy your keys or hack your car's system it will not be able start the vehicle. It's also completely quiet and unnoticeable by anyone who tests it and you can be sure that no one will notice that you've added an extra layer of security.
Another reason it is so effective in preventing theft is its ability to stop your engine from running, even if a thief is able to break into. This is accomplished through the use of an additional device, called the Shadow, which connects to your car's CAN data network and does not communicate via radio frequency, which makes it difficult for thieves to track or tamper with. In addition to this, the Shadow can be linked to a tracking/paging system that will allow you to monitor your vehicle's movements. Additionally, it also has an output which can be used to activate an alarm (if authorized) in the event of someone trying to steal the vehicle.
It is vital to work in a well-lit space when working with wiring to help you identify the correct wires, and to avoid accidental short circuits or disconnections. Making sure you double-check and test the connections is essential, as well as insulation of the wiring to shield it from the elements. Cable ties can be used to bundle and secure wires. This will improve their appearance, and also reduce the risk of them becoming disconnected when the vehicle is in use.
It is recommended to mark the CAN H and L wires with pieces of tape or labels, as not knowing where they are could result in an electric surge that could damage the immobiliser. It is also recommended to test the power source and grounding location with an instrument to ensure that they are providing a steady 12V supply as well as a solid grounding.
Simple to use
A ghost immobiliser can help you protect your vehicle from theft. It stops key cloning, ECU swapping and other security threats, and it can be paired with an iPhone application for simple monitoring and management. The app will also send alerts if your car is altered. The app can also assist you to locate your vehicle in the event that it is stolen.
The Ghost immobiliser is discrete and doesn't require any special equipment to function. It is connected to the CAN system in your vehicle and is programmed with an individual PIN code. It is activated by pressing a series of buttons on your dashboard or steering wheel, or by using the WeCar mobile app. The unique code has to be entered before the engine will begin, which means thieves won't be able to simply switch on your car and drive away.
Installing an immobiliser from Ghost is an easy process. But, it's essential to follow the steps to ensure that the systems of your vehicle are working smoothly. The first step is disconnection of the battery. This will prevent airbag deployment and ensure security. It is also essential to work in a place that is well-lit so that you can avoid a sloppy and inaccurate connections. It is also essential to employ appropriate soldering techniques or top-quality connectors to ensure a solid and solid connection.
The CAN H wire as well as the CAN L wiring are required to connect your Ghost immobiliser to the wiring in your vehicle. Use a wiring diagram identify the wires. Then, determine the most suitable location to connect them. Label these wires with tape or labels to aid in identifying them during installation.
It's a good idea test your immobiliser after the connections have been made to ensure that it is working as intended. It is also advisable to test the Transport Mode which disables the Ghost System and lets you temporarily disable your security functions. This is especially useful for situations such as transporting vehicles or for service. This feature is particularly beneficial if you have an older vehicle that requires its battery to be isolated for service.
Low-profile
Ghost immobilisers can be used to prevent theft from vehicles with keyless entry. It works by capturing the vehicle's remote control signal and forming a barrier that thieves can't breach it without the proper PIN code. It's a discreet and reliable method to safeguard your vehicle, and it's even suggested by insurance companies to reduce the cost of your monthly costs. It's a low-profile device that's hidden in your car's existing buttons and doesn't use LED indicators, which makes it virtually inaccessible to thieves.
The Ghost immobiliser, unlike most other security systems is connected to the CAN data network of your vehicle instead of remote control. This means that thieves won't be able to recognize or disable the device through wire cutting and is tamper-proof. This makes it harder to steal your vehicle, and it's an excellent choice for older vehicles that are not fitted with a modern keyless entry system.
Installing a ghost immobiliser is simple when you have the right equipment and materials. You'll need a few basic hand tools as well as a multimeter for checking electrical values, as well as insulation tape or cable ties to make sure that your connections are secure and well-insulated. You should also disconnect your battery prior to beginning, and ensure that the wiring is properly wrapped and insulated to avoid the theft of your wiring.
You can request an establishment in your area to install your immobiliser if you are not comfortable doing it yourself. They'll handle everything from the initial inspection all the way to installing the device and will offer a guarantee in the event that something goes wrong. They'll answer any questions regarding the immobiliser, and also help you decide if it's the right choice for you vehicle.
The Autowatch Ghost 2 is a smart immobiliser that is integrated directly with the ECU of your car. This protects against hacking and key cloning attacks that are common in modern automobiles. It is TASSA-certified and provides the best theft protection, so you can drive with confidence.
TASSA verified
The Ghost immobiliser system is among the most effective methods to safeguard your vehicle from theft. It connects to the car's CAN data network and utilizes it to stop the engine from starting without a unique PIN code. The system is undetectable by thieves and is a great alternative to an alarm for your car. You can change the PIN code at any time, and only you will be aware of it, ensuring the security of your vehicle.
A TASSA certified installer will complete the installation of the Ghost system in a couple of hours at your home or at your place of work. You will also receive a free emergency card, installation certificate, and owner's manuals. They will also give you a an extensive demonstration of the device, and ensure that you are satisfied with the service before they leave.
The Ghost unlike other immobilisers, is able to connect directly to the CAN data network of your vehicle. This allows it to be fitted without severing any wires. It's also quiet, making it difficult to be detected by thieves. The system is equipped with a unique and reversible PIN code, which you enter by pressing buttons on the dashboard or the steering wheel. This stops anyone from starting your vehicle even if they possess the key fob.
Remove the battery before you begin installing an immobiliser ghost 2. This will stop accidental airbag deployments or short circuits. Once the battery has been disconnected, it's important to follow the instructions in the user manual for connecting the immobiliser. It is also recommended to consult online resources for more information specific to the model of your vehicle.
You should check the immobiliser after you have completed it to make sure it is working properly. Enter the PIN code into the vehicle and then try to start it. After this you must conduct regular checks to ensure that the immobiliser functioning properly. This will allow you to identify any problems early and fix them swiftly.